EN
fr 
de 
es 
it 
ru 
pt 
ar 
ms 
id 
Anern, with 16 years of experience in the energy industry, from solar systems to solar accessories, from indoor LED lighting to outdoor solar lighting, we are one of the sources to meet your diverse needs.
Anern has 16 years of experience in solar lighting and solar product manufacturing. Anern is headquartered in Guangzhou. With a production base of 7,000 square meters, our company has an R&D team of more than 100 people.
Generally speaking, the width of rural roads is mostly between 3 meters to 5 meters, so the height of the street light pole is generally chosen to be 5 meters or 6 meters high, which is sufficient. Too high will increase the cost and cause the waste of resources, while too low affects the aesthetics.
More and more rural areas are installing village solar light street lamps, so village solar motion street lights what wattage of LED lamp head is appropriate, which can meet the lighting needs and is also affordable. For the choice of lamp head power for rural solar LED street lights, many customers hardly understand, blindly pursuinghigh power, high configuration, believing that high-power lamp heads have good lighting effect. In fact, for normal rural use 30W to 50W is already enough, city roads use about 60W to 100W solar street light. Moreover, high-power lamp heads themselves are difficult to apply to solar LED street lights. If used, it will also affect solar LED street lights.
Solar light Street Lamps if using high-power lamp heads, the battery storage capacity is hard to meet the lighting duration, just this point makes the high-power lamp heads unsuitable for solarLED street lights, speaking of which solar LED street lights have always been energy-efficient, only by matching the appropriate power of LED lamp head can this be achieved.
If you insist on village solar motion street lights using high-power lamp heads, then to light up the lamp heads, definitely requires a big solar panel, the area of the solar panel will be very large, too large solar panels will inevitably cause a greater load on the street light pole, in windy weather, the force area is too large, increasing the risk factor, and safety hazards exist.This would be counterproductive.
Finally discussing the heat dissipation issue, as long asinvolvingelectricity heat will be produced, just like how our mobile phones heat up when charging. Then, the energy consumption and heat dissipation of high-power lamp heads are not ideal, high-power lamp heads will generate more heat when lighting up, the heat cannot be dissipated upwards, which can easily cause the street lamp fixture to overheat. Seriously affectingthe lifespan of village solar light street lamps, and even due to overheating of the lamp head causing it to burn and fall off, endangering the safety of pedestrians.
Generally speaking, Solar light Street Lamps 5 meters or 6 meters match well with 30 watts or 40 watts LED lamp head, if there are special requirements, 50 watts can also be used, but solar motion street light manufacturers do not recommend blindly matching higher power LED lamp heads.
Anern supplies solar energy products and system solutions to customers in more than 200 countries and regions, supporting residential, commercial, industrial, and off-grid solar power projects.
Anenr main serve markets:
Middle East: Iraq, Lebanon, Syria, United Arab Emirates, Afghanistan, Yemen, Saudi Arabia
Africa: Nigeria, Zambia, Kenya, Mali, Burkina Faso, South Africa, Egypt, Tanzania, Mozambique, DRC, Botswana, Ethiopia, Egypt, Morocco, Cameroon, Zimbabwe, Ghana, Algeria, Libya, Uganda
Southeast Asia: Philippines, Indonesia, Malaysia, Myanmar, Thailand, Vietnam, Pakistan
Americas: Colombia, Mexico, Brazil, Peru, Argentina, Chile, Honduras, Ecuador, United States
Central Asia: Uzbekistan, Kazakhstan, Kyrgyzstan, Tajikistan
Europe: Ukraine, Türkiye, Germany, Romania, Poland, France
Note: If you want to distinguish by product, the above regions of the Middle East, Africa, Southeast Asia, and South America are all suitable for solar street lights and energy storage, while Central Asia and Europe are only suitable for solar energy storage products.
As one of the leading solar equipment suppliers in China, Anern provides OEM and ODM services to meet your various needs.
Rain actually helps solar panels work more efficiently. This is because rain will wash away any dirt or dust that collects on the panels so they can absorb sunlight more efficiently. Anern's solar panels actually generate more electricity than you need during peak sunlight hours. This excess power can be used to provide additional power on days or at night.
Yes, Anern is a solar inverters manufacturer, as confirmed by their proprietary product lines and industrial capabilities.
As one of China's leading solar power inverter manufacturers, Anern designs and produces multiple inverter series, including:
AN-SCI-PRO Series: Featured on dedicated product pages with factory production images
AN-PVI Series: High-capacity inverters (6000W-10000W) offered commercially
AN-SCI-EVO Series: Hybrid inverters catering to grid-tie/backup needs
Off-grid parallel inverters: Designed for areas with unstable/no grid access
Their inverters incorporate:
Independent R&D - Core technologies developed in-house
Industrial scale production - Manufactured in 30,000+ sqm factories
Global compliance - Certified to meet international standards (CE, ROHS, TUV)
3-7days for samples, 7-20 days for bulk order, depending on order quantity and production schedule.
