EN
fr 
de 
es 
it 
ru 
pt 
ar 
ms 
id 
Anern, with 16 years of experience in the energy industry, from solar systems to solar accessories, from indoor LED lighting to outdoor solar lighting, we are one of the sources to meet your diverse needs.
Anern has 16 years of experience in solar lighting and solar product manufacturing. Anern is headquartered in Guangzhou. With a production base of 7,000 square meters, our company has an R&D team of more than 100 people.
All-in-one Solar Light uses crystalline silicon solar cells for power supply, stores electric energy in batteries (gel batteries, sealed lead-acid batteries, gel batteries, lithium iron phosphate batteries), uses ultra-high brightness LED lights as light sources, and is controlled by an intelligent charge and discharge controller to replace traditional public power lighting street lamps.
LED street lamp (including light source)
Solar panel
Battery
All-in-one Solar Light Controller
Streetlight pole (including foundation, solar panel bracket)
Auxiliary materials such as wires and other parts
Solar cell modules generally use monocrystalline silicon or polycrystalline silicon solar cell modules; LED lamp heads generally use high-power LED light sources; controllers are generally placed inside the lamp pole, with light control, time control, overcharge and overdischarge protection, and reverse connection protection. More advanced controllers also have functions such as seasonal adjustment of lighting time, half-power functions, and intelligent charge and discharge functions. The battery is generally placed underground or has a special battery insulation box and can use valve-regulated lead-acid batteries, gel batteries, iron-aluminium batteries or lithium batteries. Solar lamps work fully automatically, without the need for trenching and cabling, but the lamp pole needs to be installed on embedded parts (concrete base).
Using the principle of the photovoltaic effect, solar cells made of this principle will receive solar radiation energy and convert it into electrical energy output during the day through the solar panel, and store it in the battery through the charge and discharge controller. When the open circuit voltage of the solar panel is lower than the set value in the evening, the charge and discharge controller detects this voltage value and acts, allowing the battery to discharge to the lamp head. The battery stops discharging after a set period or the controller detects daytime, ending the discharging process. The controller then waits for dawn or starts the charging process.
All-in-one Solar Light is usually not affected in winter. However, in snowy weather, it may be significantly impacted, especially in the three northeastern provinces. In winter, when there is heavy snow, the solar panel might be covered, and thick snowflakes can block the panel from receiving sunlight, which may cause the LED to not light up. All-in-one Solar Light does not convert a certain amount of heat into electricity for road lighting. However, to ensure the LED All-in-one Solar Light works normally in winter, one can manually or mechanically clean the panels when there is snow accumulation.
Long-term neglect of cleaning the solar panel can lead to significant dust accumulation, affecting power generation. In some areas, snow often covers the solar panel, resulting in insufficient power generation.
When the Solar Light All-in-one reaches a certain usage period, if the battery still undergoes charge and discharge cycles, as the usage time increases, the power consumption will also increase. Generally, the LED All-in-one Solar Light will have shorter lighting durations day by day after exceeding its service life. This is normal, and the battery usually needs timely replacement in such cases.
To avoid freezing: When selecting a solar panel, choose products with good processing quality, fewer seams, and fewer welding points. The solar panel should be simple and clean, and also moisture-proof, to prevent freezing. To avoid freezing in cold regions' LED All-in-one Solar Light. It is well known that cold regions often experience rainy and snowy weather. Such weather can easily cause the streetlights to freeze, because the All-in-one Solar Light relies on the solar panel to collect solar energy for power generation. If the panel is frozen, it will cause the LED All-in-one Solar Light to malfunction, requiring timely maintenance.
Generally 3-10 years warranty , vary from different items.
3-7days for samples, 7-20 days for bulk order, depending on order quantity and production schedule.
We use SMD5730, EPISTAR and LG 3030 LED chips, with high light efficiency, low power consumption, wide luminous Angle and other characteristics.
Anern's energy storage systems are used in the following solar applications:
Residential Backup Power:
For home use during power outages, providing up to 6 hours of continuous power for average household consumption. These systems reduce grid reliance and electricity bills while storing excess solar energy.
Commercial and Industrial Energy Management:
Installed in factories and businesses to store excess solar energy, reduce peak-hour grid consumption, and lower electricity costs. Systems are deployed in secure, ventilated locations for stability.
Off-Grid Infrastructure:
Supports meteorological/hydrological observation equipment and other critical infrastructure in remote areas without grid coverage. Battery banks store solar energy converted via inverters for reliable operation.
Agricultural Operations:
Powers farms by converting stored solar energy into AC electricity, maintaining agricultural activities during outages or grid instability.
Large-Scale Solar Projects:
Used in independent photovoltaic power stations ranging from 10KW to 50MW capacity, enabled by parallel-connected hybrid inverters for solar energy conversion and storage.
Anern supplies integrated solar energy storage systems that combine lithium battery storage with solar inverters and system components for residential, commercial, and off-grid solar power applications.
